Worcestershire, UK
Sandy Lane, Stourport, DY13 9QB
Send us a message
We reply within 1 day
+44(0)1299 823158
Available 9am - 5pm, Mon-Fri
Sandy Lane, Stourport, DY13 9QB
We reply within 1 day
Available 9am - 5pm, Mon-Fri
Pin units are open and closed by hand, the activation is purely manual no automation is required. Ideal for low volume applications or where there is no air available for the application. Some of the models may be fitted with sensors to detect whether the units are forward or back.
The pin unit has spring assist, the units are retracted manually using a hand lever and then springs forward.
The pin units open and close automatically, driven by a pneumatic cylinder. The units will also be fitted with a sensor to detect whether the units are forward or back.
The pin units are pneumatically powered and so designed so it can be moved forward manually and it automatically retracts. The units will also be fitted with a sensor to detect whether the units are forward or back.
This is a pneumatically powered locator that has toggle locking mechanism, this increases the force the unit can apply. These units maybe automatically applied or manually applied and power off. The units will also be fitted with a sensor to detect whether the units are forward or back.
The clamps operate automatically driven by a pneumatic cylinder, clamps are supplied with a sensor to detect whether the clamp is open or closed.
The clamp is applied manually, air backed up and then pneumatically opened, used in applications where the welded bracket may need to be located by hand, clamps are supplied with a sensor to detect whether the clamp is open or closed.
Clamps are open and closed manually, sensors maybe fitted to detect whether the clamps are open or closed.
Clamps are automatically applied and powered with a pneumatic cylinder. Sensors maybe fitted to detect whether the clamps are open or closed.
The clamp maybe manually applied, air backed up and then pneumatically opened, , clamps are supplied with a sensor to detect whether the clamp is open or closed.
Pin units are open and closed by hand, the activation is purely manual no automation is required. Ideal for low volume applications or where there is no air available for the application. Some of the models may be fitted with sensors to detect whether the units are forward or back.
The pin units open and close automatically, driven by a pneumatic cylinder. The units will also be fitted with a sensor to detect whether the units are forward or back.
The pin units are pneumatically powered and so designed so it can be moved forward manually and it automatically retracts. The units will also be fitted with a sensor to detect whether the units are forward or back.
This is an pneumatically powered locator that has toggle locking mechanism, this increases the force the unit can apply. These units maybe automatically applied or manually applied and power off. The units will also be fitted with a sensor to detect whether the units are forward or back.
Our friendly team has more than sixty years of experience and are happy to help you, no matter how impossible or unique your current manufacturing challenge might appear. Get in touch today so we can point you in the right direction.
Sandfield Engineering Company are the toggle, power and bespoke clamp experts. We design and manufacture engineering solutions that keep production lines running smoothly. We provide custom engineered solutions, prevent water pollution and drive increased efficiency through automation.
Protected by SSL Encryption
